SUNONE SALON 4 LAMP UV LED 90W

SUNONE SALON 4 LAMP UV LED 90W

The latest generation, professional 90W UV / LED lamp, which quickly and evenly cures all gels, hybrid varnishes and other light-curing preparations.
The SUNONE salon4 lamp is equipped with an unusual motion sensor with a memory function that will start working after placing your hand inside the lamp. The memory function in this device consists in the fact that the lamp remembers the last set time, provided that this time goes down to 0 (e.g. we set the timer for 10 seconds, if this time elapses, the lamp will start to count down 10 seconds after re-inserting the hand). The smart sensor function works in the 10s, 30s, 60s and 99s modes. This function improves the comfort of using the lamp in the case of products with the same curing time and affects the speed of operation.
 
The dual LED technology makes the lamp reliably, quickly and evenly cures all hybrid varnishes and gels. The lamp emits light that does not tire your eyesight. It has an energy-saving high-power light source and a dual wavelength of 365nm and 405nm.

The lamp has as many as 45 LEDs, which give a total maximum power of 90 Watt. Strategically placed LEDs will make each place on the nail properly cured.
 
The lamp has a built-in motion sensor, a timer of 10, 30, 60 and 99 seconds, and after activating the sensor, it lights continuously for 120 seconds. The 99 seconds mode is the mode in which the lamp power increases gradually over 99 seconds. This mode is recommended for working with builder gels and other applications that require a long cure time. The bottom panel of the lamp is magnetic and easy to detach for pedicure applications. The size of the lamp allows you to easily insert your whole hand, without the need to harden your thumbs separately. A large electronic display will facilitate work.

The working time of this device is provided for up to 50,000 hours.

European adaptor

Complaints policy
- the cost of returning the broken device is covered by the customer
- until the manufacturer makes a decision, the broken device is not refundable
- if the manufacturer cannot repair the device, the costs will be reimbursed
- it is not possible to exchange the goods for another one
- if the defect was caused by improper use, the repair costs are covered by the customer
- the warranty and its conditions are included in the warranty card