Fomos Foster 8L Autoclave white (154444)

Fomos is a professional manufacturer of medical equipment and instruments, combining innovative design, advanced research and development, and high-quality production. Specialising in autoclaves and sterilisation equipment, the brand provides solutions that guarantee reliability, safety and operational efficiency in beauty, dental and medical practices.

Safe sterilisation of a wide range of instruments

The Fomos Foster 8 L autoclave is a professional piece of equipment that is ideal for any beauty salon, nail salon and other venues where maintaining the sterility of tools used during treatments is essential. Sterilisation using a top-class medical-grade autoclave ensures the full effectiveness and safety of the process, thereby facilitating the maintenance of high hygiene standards in the clinic. The equipment is designed for the sterilisation of both medical and non-medical instruments, whether packaged or unpackaged, porous, solid, or featuring recesses and channels. The device may only be operated by qualified staff who possess the knowledge and appropriate training in the use of this type of equipment.

Improvements to enhance functionality

The unit is equipped with a control panel featuring an LED display, allowing the selection of appropriate programmes or parameters and real-time monitoring of the process. The built-in thermal printer allows for the printing of sterilisation process confirmations, which include information such as: the date and time of the cycle, and changes in temperature and pressure. Additionally, the USB port allows sterilisation results to be saved in digital form. Built-in tanks for distilled water and waste water significantly streamline operations. The self-diagnostic system alerts the user to any faults by displaying relevant messages, e.g. regarding a door seal failure or sensor damage, thereby reducing the risk of equipment damage.

Available sterilisation and test programmes

The autoclave comes pre-programmed with: 5 sterilisation programmes and 2 test programmes – enabling the performance of vacuum tests and B&D-Helix tests. It allows parameters to be selected to suit individual needs and the specific load, while maintaining full process safety. It is also possible to adjust the sterilisation and drying times, which makes it easier to tailor the cycle to the type of instruments and the specific characteristics of the packs.

STERILISATION PROGRAMMES Sterilisation programme Load type Cycle type Temperature Pressure Pre-vacuum ratio Sterilisation stage time* Drying stage time* 134°C universal Programme designed for the sterilisation of packaged instruments Class B 134°C 210 kPa 3-cycle 4 minutes 10 minutes 134°C rapid Programme designed for sterilising unpackaged instruments Class S 134°C 210 kPa 1 cycle 4 minutes 10 minutes 134°C prions Applies to persistent viruses Class B 134°C 210 kPa 3 times 20 minutes 10 minutes 121°C universal Programme designed for sterilising packaged instruments Class B 121°C 110 kPa 3-cycle 20 minutes 20 minutes 121°C rapid Programme designed for sterilising unpackaged instruments Class S 121°C 110 kPa Single cycle 20 minutes 9 minutes

* The preheating phase and the cooling-off period must be added to the total duration of each programme.

Medical Class B The most advanced sterilisation class, enabling effective sterilisation of both packaged and unpackaged instruments, regardless of their type, thanks to the use of a fractionated pre-vacuum. 8-litre capacity Ideal for beauty salons or clinics. It accommodates a basket with 3 trays on which both packaged and unpackaged instruments can be placed. Legal requirements The device complies with the requirements of Directive 93/42/EEC concerning medical devices.
It also complies with the standards IEC 61010-1: 210+A1:2016, IEC 61010-2-040: 2020, EN 13060: 2014 A1: 2018, IEC 61326-1: 2020. The manufacturer holds EN ISO 13485:2016 certification. Built-in printer Thermal paper is used, which avoids the hassle of replacing ink cartridges. USB port Enables digital recording of sterilisation data onto a USB drive. Sterilisation of instruments in bulk or in packs Both sterilisation methods are highly effective. Control panel with LED display Allows you to easily select the appropriate programme and set the parameters. During the process, it displays the temperature, pressure and time. 7 automatic programmes 5 sterilisation programmes, 2 test programmes Built-in tanks for distilled and waste water The clean water tank is designed for distilled or deionised water used for sterilisation. The presence of a waste water tank means there is no need for an additional external container. Automatic cleaning programme After 300 sterilisation cycles, the system automatically prompts you to run the cleaning programme, which takes 15 to 20 minutes. Self-diagnostic system On-screen messages help prevent damage. Stainless steel chamber The material used is designed for medical applications and is durable, which attests to the high quality of the device’s construction. Technical passport Included in the set. Warranty 12 months. The duration of the warranty is not dependent on the number of cycles performed.

Technical data Certificates and standards 93/42/EEC
EN ISO 13485:2016
IEC 61010-1: 210+A1:2016, IEC 61010-2-040: 2020, EN 13060: 2014 A1: 2018, IEC 61326-1: 2020 Power 1800 W Rated voltage 230 V AC Vacuum level 1-stage and 3-stage Packaging dimensions 710 x 550 x 525 mm External dimensions 560 x 408 x 420 mm Chamber material stainless steel Chamber dimensions depth 320 mm
ø 170 mm External tray dimensions 26 x 12.5 x 1.5 mm

Please read the instructions carefully before use.
Included: autoclave , tray frame, three trays, handle for removing the tray, printer paper, drain hose, power cable, door seal, user manual, technical data sheet.